Products

The PSX307 Plasma Cleaner provides 1.5 times the productivity of conventional plasma cleaners. Panasonic's parallel plate plasma chamber technology delivers superior etch uniformity compared to conventional batch-type plasma cleaner systems.By using an argon plasma treatment, ultra-thin gold-plated electrodes can be wire-bonded reliably without the formation of nickel compounds. The savings achieved in cheaper gold plating can provide the ROI justification alone. The PSX307 Plasma Cleaner's other capabilities include surface modification by oxygen plasma, improving mold resin adhesion and under-fill wettability, and reducing the incidence of peel-off, voids, and cracks.Panasonic's Plasma Monitoring System suppresses abnormal discharges for a secure and efficient production process. The option to include traceability functionality ensures high level process quality as well.

The NPM-VF is equipped with a double portal. The SMD and THT components are placed by one placement head per portal. A wide variety of vacuum pipettes and grippers are available. The pick and place machine can be used in single or dual lane mode. The NPM-VF reaches a speed of up to 4,500cph and can process component sizes from 5x5mm up to 130x35mm and 60mm height. Active cutting and clinching tools are integrated which detach THT components from the radial and axial feeders. Clinching directions as well as pin lengths per THT component can be defined via the assembly program. Beside the radial and axial feeders, the NPM-VF can be equipped with all common standard feeder systems for SMD components. The flexible NPM-VF is an ideal machine for cycle-optimized production, especially for companies that must process both types of components due to the increased demand from power electronics for THT assemblies. This efficient pick and place machine contributes to reduce manpower requirements and to consistent production with high productivity, flexibility and high-quality pick and place results.

Supplied with a 40 or 80 component feeder with optional jumper wire, the compact supply unit configuration of the AV132 can fit both ammo pack and reel. The dual partition configuration enables a fast changeover. The next job can be set up while the current one is being processed.Capable of inserting components in four directions: 0°, 90°, 180°, and 270°, the AV132 optimizes productivity by simultaneously handling 26 and 52mm taped components and providing fast, full auto-recovery. The AV132 can reduce loading times by running two PCBs simultaneously, enabling efficient production due to a speed of 0.12s/component and a transfer speed of 2s/PCB.The fixed feeder unit and the out-of-component detection feature allow to replenish components while maintaining long-term non-stop runs.Preparation in advance or equipment operation during component change-over is possible.

Building upon the PSX307 Plasma Cleaner, the PSX307A Plasma Cleaner features an enlarged plasma chamber capacity that improves productivity. In addition, the PSX307A system is able to handle full wafers (both bare and on dicing frames).  Besides the increased capacity, Panasonic's original Plasma Monitoring System suppresses abnormal discharges resulting in a secure and efficient production process.  Additionally, the option to include a traceability functionality  ensures high level process Quality.

The RL132 combines functionality and speed with an insertion rate up to 25,700cph (.14s/component), a board processing sizes up to 650 x 381mm, a 33% reduction in PCB transfer time, up to 18% reduction in electrical and air consumption per insertion and an improved parts lifespan for a very low cost of ownership. This through-hole machine features a 4-pitch span and is configurable with 40 or 80 components inputs. Meanwhile, its dual split carriage enables machine function at exchange mode and parts replenishment during production. The RL132 was designed for a non-stop productivity. The Lead V cut method enables the RL132 to insert radial lead components at a speed of 0.14s/component. Either a 2-pitch (2.5mm/5.0mm), 3-pitch (2.5mm/5.0mm/7.5mm) or 4-pitch (2.5mm/5.0mm/7.5mm/10.0mm) option can be selected. The fixed feeder unit method and an out-of-component detection function allow ongoing component replenishment and long-term runs. PCB of 650mm x 381mm can be processed.

The Desktop Port Replicator (CF-VEB201U) is designed for compatibility with TOUGHBOOK G2, G1 models

FZ-VSTN11U

TOUGHBOOK N1 Extended Battery Pack

THE SHOULDER STRAP (FZ-VNS401U) IS DESIGNED FOR COMPATIBILITY WITH THE TOUGHBOOK 40

68Whr Battery for TOUGHBOOK G2

THE DESKTOP PORT REPLICATOR (FZ-VEB401U) IS DESIGNED TO PROVIDE CONNECTIVITY AND FUNCTIONALITY IN A DESKTOP ENVIRONMENT, FULLY COMPATIBLE FOR THE TOUGHBOOK 40

THE LI-ION BATTERY PACK (FZ-VZSU1XU) HAS AN IMPRESSIVE 18 HOURS OF BATTERY LIFE AND CHARGED IN 3 HOURS, FULLY COMPATIBILITY FOR THE TOUGHBOOK 40