| Projector type | 1-Chip DLPTM projector |
|---|
| Display method | DLPTM chip x 1, DLPTM projection system |
|---|
| Display Device -> Panel size | 16.5 mm (0.65 in) diagonal (16:9 aspect ratio) |
|---|
| Display Device -> Number of pixels | 1920 x 1080 pixels
(If a signal other than 120 Hz/240 Hz is input, it cannot be displayed at this resolution.) |
|---|
| Light source | Laser diodes |
|---|
| Light output | 6,000 lm |
|---|
| Light output (ANSI) | 6,000 lm |
|---|
| Light output (Center) | 6,200 lm (Center) |
|---|
| Time until light output declines to 50 % -> NORMAL | 20,000 hours [NORMAL] |
|---|
| Time until light output declines to 50 % -> ECO | 24,000 hours [ECO] |
|---|
| Time until light output declines to 50 % -> QUIET | 20,000 hours [QUIET] |
|---|
| Resolution | 4K (3840 x 2160 pixels) (With Quad Pixel Drive) |
|---|
| Contrast Ratio (typ.) | 20,000:1 (Full On/Full Off)
(When [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] is set to [1]. HDMI signal input) |
|---|
| Screen size (diagonal) | 1.02–7.62 m (40–300 in), 16:9 aspect ratio |
|---|
| Center-to-corner zone ratio | 90% |
|---|
| Lens | 2.0x manual zoom (throw ratio: 1.46–2.93:1), manual focus, F 2.0–3.4, f 21.5–43.0 mm |
|---|
| Lens shift -> Vertical(from center of screen) | +71 %, -48 % (manual) |
|---|
| Lens shift -> Horizontal(from center of screen) | +34 %, -27 % (manual) |
|---|
| Keystone correction range | Vertical: ±40 °, Horizontal: ±20 ° |
|---|
| Installation | Ceiling/floor, front/rear, free 360-degree installation |
|---|
| Terminals -> HDMI™ IN | HDMITM 19-pin x 2 (Compatible with HDCP 2.3, Deep Color, 4K/60p signal input*6), CEC supported |
|---|
| Terminals -> COMPUTER IN（D-SUB 15pin） | D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR) |
|---|
| Terminals -> COMPUTER OUT（D-SUB 15pin） | D-sub HD 15-pin (female) x 1(RGB/YPBPR/YCBCR) |
|---|
| Terminals -> AUDIO IN(M3 Stereo Mini Jack) | M3 stereo mini-jack x 2 |
|---|
| Terminals -> AUDIO OUT(M3 Stereo Mini Jack) | M3 stereo mini-jack x 2 |
|---|
| Terminals -> SERIAL IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
|---|
| Terminals -> DIGITAL LINK IN / LAN | RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseTTM compliant), 100Base-TX (Compatible with PJLinkTM [Class 2], Art-Net, HDCP 2.3, Deep Color, 4K/60p signal Input*7, Extron XTP®) |
|---|
| Terminals -> LAN | RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLinkTM [Class 2], Art-Net) |
|---|
| Terminals -> USB TYPE A | USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module, for USB memory,
and for power supply (DC 5 V, maximum 2 A) |
|---|
| Terminals -> SLOT | IPv4, IPv6*8 |
|---|
| Protocol versions | IPv4, IPv6*9 |
|---|
| Power supply | AC 100–240 V, 50/60 Hz,
AC 110 V, 60 Hz (Taiwan) |
|---|
| Maximum power consumption | 505 W (5.5–2.4 A) (525 VA) |
|---|
| On-mode power consumption(Operating mode) -> Normal | [NORMAL] 445 W |
|---|
| On-mode power consumption(Operating mode) -> Eco | [ECO] 355 W |
|---|
| On-mode power consumption(Operating mode) -> Quiet | [QUIET] 355 W |
|---|
| Standby power consumption -> Normal | 15 W （Standby Mode）［NORMAL］ |
|---|
| Standby power consumption -> ECO | 0.5 W （Standby Mode）［ECO］ |
|---|
| Cabinet materials | Molded plastic |
|---|
| Filter | No |
|---|
| Operation noise -> Normal | 36 dB [NORMAL] |
|---|
| Operation noise -> Eco | 36 dB [ECO] |
|---|
| Operation noise -> Quiet | 31 dB [QUIET] |
|---|
| Dimensions (W x H x D) | 498 x 168 x 492 mm (19 5/8˝ x 6 5/8˝ x 19 3/8˝ ) |
|---|
| Dimensions (W x H x D) -> Width (not including protruding parts) | 498 mm (19 5/8˝) |
|---|
| Dimensions -> Height (including protruding parts) | 168 mm (6 5/8˝) |
|---|
| Dimensions -> Depth (not including protruding parts) | 492 mm (19 3/8˝ ) |
|---|
| Weight | Approx. 16.4 kg (36.2 lbs) |
|---|
| Operating environment -> Operating temperature | 0–45 °C (32–113 °F) |
|---|
| Operating Environment -> Operating humidity (No condensation) | 10–80 % (no condensation) |
|---|
| Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Projector Network Setup Software |
|---|
| Control function via LAN | Crestron ConnectedTM V2, Crestron XiO CloudTM*12, Art-Net DMX, AMX® DD, and PJLinkTM (Class 2) |
|---|
| Footnote Description | - If a signal other than 120 Hz/240 Hz is input, it cannot be displayed at this resolution.
- When [PICTURE MODE] is set to [DYNAMIC], [DAYLIGHT VIEW] is set to [OFF], [DYNAMIC CONTRAST] is set to [OFF], [LIGHT OUTPUT] is set to [100%], and [AUTO POWER SAVE] is set to [OFF].
- Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped.
- Measurement, measuring conditions, and method of notation all comply with American National Standards Institute standards. Value is the average of all products when shipped.
- Average light-output value of all shipped products measured at the center of the screen.
- Around this time, light output will have decreased to approximately 50 % of its original level ([PICTURE MODE]: [DYNAMIC], [DYNAMIC CONTRAST] set to [2], temperature 30 °C [86 °F], elevation 700 m [2,297 ft] with 0.15 mg/m3 of particulate matter). Estimated time until light output declines to 50 % varies depending on environment.
- 4K/60p signals are converted to the projector's resolution upon projection.
- 4K/60p signals are converted to projector’s resolution. Supports YPBPR 4:2:0 format only.
- Main firmware version must be 3.00 or higher. Optional AJ-WM50 Series Wireless Module is not compatible with IPv6.
- With legs fully retracted.
- Average value. May differ depending on the actual unit.
- When using the projector at an altitude lower than 2,700 m (8,858 ft) above sea level, and the operating environment temperature becomes 35 °C (95 °F) or higher, the light output may be reduced to protect the projector. When optional AJ-WM50 Series Wireless Module is attached, operating temperature range becomes 0–40 °C (32–104 °F).
- Main firmware version must be 3.00 or higher.
|
|---|
Seite teilen
Share this link via:
Twitter
LinkedIn
Xing
Facebook
Or copy link: