Products

2.72-4.48:1 (WUXGA) Throw Ratio

1.4-2.1:1 Throw Ratio 3-Chip DLP™ Zoom Lens for PT-RQ50 projector with Lens Memory and Stepping Motor

2.0-3.4:1 Throw Ratio 3-Chip DLP™ Zoom Lens for PT-RQ50 projector with Lens Memory and Stepping Motor

2.69~3.88:1 throw ratio (Aspect 17:9) Zoom Lens for the PT-RQ50K

4.44-7.12:1 (WUXGA) Throw Ratio 

Throw Ratio 0.550~0.690:1 (Aspect 16:10) 0.550~0.690:1 (Aspect 16:9) 0.660~0.830:1 (Aspect 4:3)

Throw Ratio 0.690~0.950:1 (Aspect 16:10) 0.690~0.950:1 (Aspect 16:9) 0.830~1.15:1 (Aspect 4:3)

Throw Ratio 0.950~1.36:1 (Aspect 16:10) 0.950~1.36:1 (Aspect 16:9) 1.14~1.63:1 (Aspect 4:3)

Zoom lens for LCD projectors is designed for compatibility with the PT-MZ20 Series projectors.

Zoom lens for LCD projectors is designed for compatibility with the PT-MZ20 Series projectors.

The RG 131 is the successor of the RHSG. By supporting 3/4 pitches, expanding the range of board sizes and increasing component insertion rate, this high-density radial component insertion machine increases productivity. High speed insertion at a rate of between 0.25s and 0.6s per component can be achieved, even for large-size components with 3-pitch (2.5mm/5.0mm/7.5mm) or 4-pitch (2.5mm/5.0mm/7.5mm/10.0mm) configurations. A comprehensive self-correction function ensures high reliability. With large numbers of component supply and dual-partitioned component supply units, long-term operation can be obtained. A total of up to 80 types of components can be mounted. With large numbers of component supply and dual-partitioned component supply units, long-term operation can be achieved easily with the RG131. A total of up to 80 types of components can be mounted, with up to 32 (16 + 16) types of large components. The two separate component supply units enable components to be exchanged and replenished during operation. Panasonic offers also the RG131-S platform version with smaller footprint. Higher productivity expanding board size range and increasing component input.

The NPM-VF is equipped with a double portal. The SMD and THT components are placed by one placement head per portal. A wide variety of vacuum pipettes and grippers are available. The pick and place machine can be used in single or dual lane mode. The NPM-VF reaches a speed of up to 4,500cph and can process component sizes from 5x5mm up to 130x35mm and 60mm height. Active cutting and clinching tools are integrated which detach THT components from the radial and axial feeders. Clinching directions as well as pin lengths per THT component can be defined via the assembly program. Beside the radial and axial feeders, the NPM-VF can be equipped with all common standard feeder systems for SMD components. The flexible NPM-VF is an ideal machine for cycle-optimized production, especially for companies that must process both types of components due to the increased demand from power electronics for THT assemblies. This efficient pick and place machine contributes to reduce manpower requirements and to consistent production with high productivity, flexibility and high-quality pick and place results.