1-Chip DLP™ Projector Ultra Short Throw Zoom Lens

ET-DLE020

Discontinued

WUXGA (0.280–0.299:1) Ultra-Short-Throw Zoom Lens for PT‑RCQ10, PT‑RCQ80, PT‑RZ990, PT‑RZ890, PT‑RZ790, PT‑RZ690, PT‑RZ120, PT‑RZ970, PT‑RZ870, PT‑RZ770, PT‑RZ660, PT‑RW930, PT‑RW730, PT‑RW620, PT‑RX110

View specifications Share page

Key features of ET-DLE020

Key features

Superior Flexibility for Easy Installation

Fits Easily in Tight Exhibition Spaces

High Reliability for Continuous Operation

On-Axis Rear Projection

Zero Offset and Flexible Setup for Multi-Screen Projection

The World’s First* Ultra-Short-Throw Zoom Lens Fits Easily in Tight Exhibition Spaces

_{* As of February 2019. For 0.4:1 throw-ratio or less. According to internal research.}
_{Note: ET-DLE020G is intended for the RQ7 Series.}

Superior Flexibility for Easy Installation

Conventional ultra-short-throw lenses demand accurate, time-consuming projector installation positioning with no margin for error. The ET-DLE020’s optical zoom, however, provides an installation margin of ±45 mm (±1.77˝) and easy image adjustment at a throw-ratio of 0.280–0.299:1 (WUXGA, 16:10), all with zero image offset. It combines with Panasonic laser projectors^*1 to support Wide-range Vertical and Horizontal Lens-Shift, more than doubling movable shift area of comparable lenses, increasing installation flexibility, and expediting setup.

_{*1 Please refer to the specifications page to check projectors compatible with ET-DLE020/DLE020G.}
_{*2 Value is for ceiling installations at WUXGA resolution. Lens-shift value will vary by model. Please see the}_{Throw Distance Calculator}_{for more information. For floor installations, up and right shift will be defined as a positive value. Down and left shift will be defined as a negative value.}

High Reliability for Continuous Operation

The ET-DLE020 features an aspherical all-glass lens that’s heat- and scratch-resistant. Durable construction enhances reliability for long-term use, and when combined with our dust-resistant laser projectors*, assures consistently brilliant images under continuous operation.

_{* Please refer to the specifications page to check projectors compatible with ET-DLE020/DLE020G.}

On-Axis Rear Projection

The ET-DLE020’s straight mirrorless design makes screen-centered projector installation possible in rear-projection applications.

_{Note: Hot spots may occur depending on the screen.}

Zero Offset and Flexible Setup for Multi-Screen Projection

Install your Panasonic 1-Chip DLP™ laser projector on-ceiling and close to the wall for full top-to-bottom screen coverage with zero offset and minimal shadowing, even in low-ceiling applications. Zoom and wide-range V/H Lens Shift joins flexible edge-blending adjustment for multi-screen projection.

Specifications of ET-DLE020

Specifications table

Lens type	Ultra-Short-Throw Zoom Lens
F-number	2.0
Focal length (f)	4.1–4.4 mm (5/32–11/64")
Screen size	100–400 inches
Throw Ratio	WUXGA(0.280-0.299:1)
Throw ratio -> 4K	0.279–0.297:1
Throw ratio -> WUXGA	0.280–0.299:1
Throw ratio -> WXGA	0.294–0.314:1
Throw ratio -> XGA	0.290–0.309:1
Lens-shift -> Vertical	+50 % – -16 %
Lens-shift -> Horizontal	+10 % – -20 %
Applicable projectors	PT‑RCQ10, PT‑RCQ80, PT‑RZ990, PT‑RZ890, PT‑RZ790, PT‑RZ690, PT‑RZ120, PT‑RZ970, PT‑RZ870, PT‑RZ770, PT‑RZ660, PT‑RW930, PT‑RW730, PT‑RW620, PT‑RX110