PT-DX100

Discontinued

1DLP - 10000 lumens - XGA - 2Lamps - Exchangeable lens - Dynamic RGB Booster - Digital Link

Key features

1-Chip DLP, 10000 lumens, XGA
Excellent image quality thanks to the dynamic RGB Booster and Vivid Colour Control
Dual lamp system with lamp relay mode enables 24/7 operation
Eco filter enables up to 12000 hours of air filter replacement cycle
10,000:1 contrast ratio
  • Excellent image quality with new dynamic RGB booster and vivid colour control
  • Dual Lamp System with lamp relay mode enables 24/7 operation
  • Filter-less dust-resistant optical engine
  • 10,000lm brightness
  • XGA (1,080 x 768) resolution
  • 10,000:1 contrast ratio (when in high contrast mode)
  • Edge blending function
  • Colour matching
  • Dynamic RGB booster
  • DIGITAL LINK
  • 3D ready

Our innovative dual-lamp system, with its new lamp, helps to make this body compact while providing 10,000lm of brightness, with 220-240V AC operation. When in ‘Lamp Relay’ mode, the system also eliminates any interruptions if a lamp should fail and enables 24/7 projection.

Panasonic’s dynamic RGB booster also achieves high image quality alongside excellent colour reproduction and brightness. Similarly, a Detail Clarity Processor 3 brings further depth and clarity to details.

The projector’s Dynamic Iris feature uses a scene-linking aperture mechanism to achieve a remarkable 10,000:1 contrast without lowering its high brightness. This helps to reproduce deeper, richer blacks, and provides images with more detailed textures.

In terms of maintenance and reliability, a dust-resistant optical block prevents dust entry to maintain image quality and a new cooling mechanism, featuring a heat-dissipating block that includes a heat pipe, reduces wear and tear on the device. Combined with a lamp replacement cycle of up to 3,000 hours, the projector delivers reduced ownership and maintenance costs.

For enhanced system integration, DIGITAL LINK compatibility allows HDMI, uncompressed video, audio and control signals to be delivered via a single LAN cable.

Specifications table

Power Consumption (120-240V AC, 50/60Hz)1,030 W(1,060 VA) (0.3 W with STANDBY MODE set to ECO, 3 W with STANDBY MODE set to NORMAL)
DLP™ Chip Panel Size17.8 mm (0.7 in) diagonal (4:3 aspect ratio)
Lens PT-DX100K/DX100WPowered zoom/focus lenses (1.8 - 2.5:1), F 1.7 - 1.9, f 25.6 - 35.7 mm
Lens PT-DX100LK/DX100LWOptional powered zoom/focus lenses and fixed-focus lens
Lamp420 W UHM lamps (x 2)
Screen Size1.27-15.24 m (50-600 inches), 1.27-5.08 m (50-200 inches) with the ET-DLE055 (4:3 aspect ratio), 2.54-8.89 m (100-350 inches) with the ET-DLE030 (4:3 aspect ratio)
Brightness10,000 lumens (dual lamp, LAMP MODE: NORMAL)
Center-to-Corner Uniformity90%

Product series

PT-DZ870 series

PT-DZ870 series
 
Model
Projector Type
420 W UHM lamps (x 2)
420 W UHM lamps (x 2)
420 W UHM lamps (x 2)
DLP™ Chip | Panel Size
16.5 mm (0.65 in) diagonal (16:10 aspect ratio)
17.8 mm (0.7 in) diagonal (4:3 aspect ratio)
17.0 mm (0.67 in) diagonal (16:10 aspect ratio)
DLP™ Chip | Display Method
DLP™ chip x 1, DLP™ system
DLP™ chip x 1, DLP™ system
DLP™ chip x 1, DLP™ system
DLP™ Chip | Number of Pixels
1,024,000 (1,280 x 800) x 1, total of 1,024,000 pixels
786,432 (1,024 x 768) x 1, total of 786,432 pixels
2,304,000 (1,920 x 1,200) x 1, total of 2,304,000 pixels
Brightness
8,500 lumens (dual lamp, LAMP MODE: NORMAL)
10,000 lumens (dual lamp, LAMP MODE: NORMAL)
8,500 lumens (dual lamp, LAMP MODE: NORMAL)
Resolution
1,280 x 800 pixels(Input signals that exceed this resolution will be converted to 1,280 x 800 pixels.)
1,024 x 768 pixels (Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.)
1,920 x 1,200 pixels
Contrast Ratio
10,000:1 (full on/full off, in dynamic iris 3 mode)
10,000:1 (full on/full off, in dynamic iris 3 mode)
10,000:1 (full on/full off, in dynamic iris 3 mode)
Screen Size
1.27 - 15.24 m (50 - 600 inches) (1.27 - 5.08 m (50 - 200 inches) with the ET-DLE055 (16:10 aspect ratio)) (2.54 - 8.89 m (100 - 350 inches) with the ET-DLE030 (16:10 aspect ratio))
1.27-15.24 m (50-600 inches), 1.27-5.08 m (50-200 inches) with the ET-DLE055 (4:3 aspect ratio), 2.54-8.89 m (100-350 inches) with the ET-DLE030 (4:3 aspect ratio)
1.27 -15.24 m (50-600 inches) (1.27-5.08 m (50-200 inches) with the ET-DLE055 (16:10 aspect ratio)) (2.54-8.89 m (100-350 inches) with the ET-DLE030 (16:10 aspect ratio))
Optical Axis Shift
Vertical: +60% (powered), Horizontal: ±10% (powered); NOTE: Optical axis shift function cannot be operated when used with the ET-DLE055. If using the ET-DLE030, the optical axis is fixed.
Vertical: +50% (powered) (±45° with the ET-DLE085/ET-DLE105), Horizontal: ±10% (powered); NOTE: Optical axis shift function cannot be operated when used with the ET-DLE055. If using the ET-DLE030, the optical axis is fixed.
Vertical: +50% (powered), horizontal: ±10% (powered); NOTE: Optical If using the ET-DLE030, the optical axis is fixed. axis shift function cannot be operated when used with the ET-DLE055.
Installation
Ceiling/floor, front/rear
Ceiling/floor, front/rear
Ceiling/floor, front/rear
Terminals | SDI In
BNC x 1, 3G-SDI signal: SMPTE ST 424 compliant; HD-SDI signal: SMPTE ST 292 compliant; SD-SDI signal: SMPTE ST 259 compliant
Terminals | HDMI In
HDMI 19-pin x 1, Deep Color, compatible with HDCP, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz -162 MHz; NOTE: Compatible with non-interlaced signals only.
HDMI 19-pin x 1, Deep Color, compatible with HDCP, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p; VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz - 162 MHz; NOTE: Compatible with non-interlaced signals only.
HDMI 19-pin x 1, Deep Color, compatible with HDCP, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p; VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz-162 MHz; NOTE: Compatible with non-interlaced signals only
Terminals | DVI-D In
DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only; 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p; VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz -162 MHz; NOTE: Compatible with non-interlaced signals only.
DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only; 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p; VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz - 162 MHz; NOTE: Compatible with non-interlaced signals only.
DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only; 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p; VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz -162 MHz; NOTE: Compatible with non-interlaced signals only.
Terminals | RGB 1 In
BNC x 5
BNC x 5
BNC x 5
Terminals | RGB 1 In | R, G, B
R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals | RGB 1 In | Y, PB, PR (Y, CB, CR)
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals | RGB 2 In
D-sub HD 15-pin (female) x 1
D-sub HD 15-pin (female) x 1
D-sub HD 15-pin (female) x 1
Terminals | RGB 2 In | R, G, B
R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals
Terminals | RGB 2 In | Y, PB, PR (Y, CB, CR)
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals | 3D Sync 1 In/Out
BNC x 1, 1.0 Vp-p, 75 ohms Input: TTL, high impedance. Output: TTL, max. 10 mA
BNC x 1, 1.0 Vp-p, 75 ohms; Input: TTL, high impedance. Output: TTL, max. 10 mA
BNC x 1, 1.0 Vp-p, 75 ohms; Input: TTL, high impedance. Output: TTL, max. 10 mA
Terminals | 3D Sync 2 Out
BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA
BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA
BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA
Terminals | Serial In
D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
D-sub 9-pin (female)x 1 for external control (RS-232C compliant)
D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals | Serial Out
D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
Terminals | Remote 1 In
M3 jack x 1 for wired remote control
M3 jack x 1 for wired remote control
M3 jack x 1 for wired remote control
Terminals | Remote 1 Out
M3 jack x 1 for link control
M3 jack x 1 for link control
M3 jack x 1 for link control
Terminals | Remote 2 In
D-sub 9-pin x 1 for external control (parallel)
D-sub 9-pin (female)x 1 for external control (parallel)
D-sub 9-pin (female) x 1 for external control (parallel)
Terminals | DIGITAL LINK
RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control) connection, 100Base-TX, compatible with Art-Net, compliant with PJLink™ (class 1), Deep Color, compatible with HDCP, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 125(1080)/60p, 1125(1080)/50p; VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz -162 MHz; NOTE: Compatible with non-interlaced signals only.
RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control) connection, 100Base-TX, compatible with Art-Net, compliant with PJLink™ (class 1), Deep Color, compatible with HDCP, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p; VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz - 162 MHz; NOTE: Compatible with non-interlaced signals only.
RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control) connection, 100Base-TX, compatible with Art-Net, compliant with PJLink™ (class 1), Deep Color, compatible with HDCP, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz - 162 MHz; NOTE: Compatible with non-interlaced signals only.
Power Supply
120-240 V AC, 10-5.2 A, 50/60 Hz
120-240 V AC, 10-5.2 A, 50/60 Hz
120-240 V AC, 10-5.2 A, 50/60 Hz
Operation Noise
40 dB (dual lamp operation, LAMP MODE: NORMAL), 35 dB (dual lamp operation, LAMP MODE: ECO)
40 dB (dual lamp operation, LAMP MODE: NORMAL), 35 dB (dual lamp operation, LAMP MODE: ECO)
40 dB (dual lamp operation, LAMP MODE: NORMAL), 35 dB (dual lamp operation, LAMP MODE: ECO)
Operating Temperature
0℃ - 45 ℃ (32℉ - 113 ℉)
0℃ - 45 ℃ (32℉ - 113℉)
0 ℃ - 45 ℃ (32℉ - 113 ℉)
Cabinet Materials
Molded plastic
Molded plastic
Molded plastic
Technology
1-Chip DLP
1-Chip DLP
1-Chip DLP

Accessories & Software

Lenses for 1-Chip DLP

ET-DLE085

0.8-1.0:1 throw ratio (WUXGA)

Lenses for 1-Chip DLP

ET-DLE150

1.3-1.9:1 throw ratio (WUXGA)

Lenses for 1-Chip DLP

ET-DLE250

2.3-3.6:1 throw ratio (WUXGA) 

Lenses for 1-Chip DLP

ET-DLE350

3.6-5.4:1 throw ratio (WUXGA)

Showing 4 of 8

Digital Interface Box

ET-YFB100G

By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.

Showing 1 of 1

Digital Interface Box

ET-YFB100G

By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.

Showing 1 of 1

DIGITAL LINK Switcher

ET-YFB200G

2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.

Showing 1 of 1

DIGITAL LINK Switcher

ET-YFB200G

2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.

Showing 1 of 1

Lamps

ET-LAD120

420 W UHM lamp x 1

Lamps

ET-LAD120W

420 W UHM lamp x 2

Lamps

ET-LAD120P

420 W UHM lamp x 1, For portrait mode

Lamps

ET-LAD120PW

420 W UHM lamp x 2, For portrait mode

Showing 4 of 4

Brackets

ET-PKD120H

High ceiling mount bracket

Brackets

ET-PKD120S

Low ceiling mount bracket

Brackets

ET-PKD130H

ET-PKD130H

Brackets

ET-PKD130B

Bracket assembly

Showing 4 of 4

Related resources

Showing 4 of 29

Showing 4 of 23

Showing 4 of 7

Showing 4 of 7