Kompakt Solid Shine Lazer 12.000 lümen Projektör

PT-RS11

Etkinlik ve sahne gösterilerinde uzun süreli, tutarlı parlaklık için tasarlanmıştır. Lazer ışık kaynağı, 3 çipli DLP, 12.000 lümen, SXGA+ projektör.

View full specifications Paylaşım sayfası

Temel özellikler

Lazer 3 çipli DLP, 12.000 lümen, SXGA+

Harika ve keskin hareketli görüntüler için 120 Hz'lik yüksek kare hızı

Toza dayanıklı sıvı soğutma sistemine ve bakım gerektirmeden 20.000 saatlik çalışma süresine sahip lambasız lazer projeksiyonu

20.000:1 kontrast oranı

	PT-RQ13	PT-RZ12	PT-RS11
Brightness	10,000 lm	12,000 lm
Resolution	5,120 x 3,200 px	1,920 x 1200 px	1,400 x 1,050 px
Contrast	20,000:1

Gerçek hareket işlemcisi, akıcı hareket yeniden üretimi için çerçeve oluşturma ile 120 Hz Yüksek Hızlı İşlemeyi birleştiriyor
Etkileyici 12.000 lm parlaklık
Dünyanın en hafif 3 Çipli DLP™ projektörü, sadece 45 kg (99,2 lbs) (Haziran 2015 itibariyle)
Dinamik Kontrast, lazer ışığını kontrol ederek 20.000:1*1 kontrast oranına kadar ulaşır
Gelecek nesil Detay Netliği İşlemcisi, en ince ayrıntılara kadar doğal doku sağlar
Sistem Günışığı Görüntüsü 3, aydınlık odalarda ve haritalandırma uygulamalarında gelişmiş renk algısı sunar
Tıbbi sunumlar ve eğitim içim DICOM Simülasyon modu*2
Rec. 709 Modu, HDTV projeksiyonu için doğru renkleri üretir

show more show less

Daha Düşük Çalışma Maliyetleri, Daha Yüksek Güvenilirlik

Oldukça uzun 20.000 saatlik ışık kaynağı ömrü*3
Yeni sıvı soğutma sistemi, sessiz çalışma sağlar
45 °C'ye (113 °F) kadar ortam sıcaklıklarında stabil çalışma*4.
Zaman içinde görüntü bozulması olmadan Tutarlı Renk Üretimi
Lazer ışık kaynağı motoru 7/24 çalışmaya olanak tanır
Toza karşı dayanıklı optik blok
Geniş elektrikli lens değişim aralığı

360 Derece Kurulum Esnekliği

Lazer ışık kaynağı sayesinde dikey, yatay ve 360 derece eğimli projeksiyon
Çoklu Ekran Destek Sistemi, Kenar karıştırma, Renk eşleme ve Dijital görüntü geliştirici ile birden fazla ekranı sorunsuz bir şekilde bağlar.
Eğimli veya küresel yüzeylerde projeksiyon için Geometrik Ayarlama
ET-CUK10 Otomatik Ekran Ayarlama Kiti ile uyumlu*5
Çoklu Ünite Parlaklık Kontrolü
Panasonic Çoklu İzleme ve Kontrol Yazılımı ve Erken Uyarı Yazılımı ile uyumlu
Tek kablolu DİJİTAL LİNK bağlantıları, video ve kontrol sinyallerini 100 metreye (328 fit) kadar aktarır
Art-Net DMX aydınlatma kontrolü protokolüyle uyumlu
3G-SDI, DIGITAL LINK, DVI-D ve HDMI gibi fazladan terminaller
Ortak lensleri (ET-D75LE90 ultra kısa atışlı lens dahil) Panasonic 3 Çipli DLP™ projektör modelleriyle paylaşır.

*1 Tam açık/kapalı, Dinamik Kontrast “3” olarak ayarlandığında, *2 Bu ürün bir tıbbi alet değildir. Tıbbi tanı amacıyla kullanmayın, *3 Kullanım ortamı, ışık kaynağının ömrünü etkileyebilir, *4 Işık çıkışı, ortam koşullarına bağlı olarak projektörü korumak için düşürülebilir, *5 ET-CUK10, Birleşik Devletler haricinde tüm dünyada kullanım için sunulmuştur Mevcudiyet, ülkeye göre değişir

Lamp	3-Chip DLP Laser
Brightness	12,000 lumens
Resolution	1,400 x 1,050 pixels (Input signals that exceed this resolution will be converted to 1,400 x 1,050 pixels.)
Power Supply	AC 100-240 V 50/60 Hz
Power Consumption	1,200 W (1,280 VA) (0.3 W with STANDBY MODE set to ECO. 4 W with STANDBY MODE set to NORMAL.), Average power consumption NORMAL: 800W ECO: 680W LONG LIFE1: 620W LONG LIFE 2: 590W LONG LIFE 3: 550W *Operating Temperature: 25 °C (77 °F), Altitude: 700m (22 ft 12 in), ICE627087: 2008 Broadcast contents, Picture mode: Dynamic, Dynamic Contrast3
BTU Value	Max 4,096 BTU
DLP™ Chip \| Panel Size	24.1 mm (0.95 inches) diagonal (4:3 aspect ratio)
DLP™ Chip \| Display Method	DLP™ chip x 3 (R, G, B), DLP™ projection system

	PT-RQ13 Series
Model	PT-RQ13	PT-RZ12	PT-RS11
Lens test	Optional powered zoom/focus lenses	Optional powered zoom/focus lenses	Optional powered zoom/focus lenses
Projector Type	3-Chip DLP Laser	3-Chip DLP Laser	3-Chip DLP Laser
DLP™ Chip \| Panel Size	22.9 mm (0.9 inches) diagonal (16:10 aspect ratio)	24.4 mm (0.96 inches) diagonal (16:10 aspect ratio)	24.1 mm (0.95 inches) diagonal (4:3 aspect ratio)
DLP™ Chip \| Display Method	DLP™ chip x 3 (R, G, B), DLP™ projection system	DLP™ chip x 3 (R, G, B), DLP™ projection system	DLP™ chip x 3 (R, G, B), DLP™ projection system
DLP™ chip \| Number of Pixels	4,096,000 (2,560 x 1,600) x 3, total of 12,288,000 pixels 49,152,000 (12,288,000 x 4) pixels when Quad Pixel Drive set to ON	2,304,000 (1,920 x 1,200) x 3, total of 6,912,000 pixels	1,470,000 (1,400 x 1,050) x 3, total of 4,410,000 pixels
Brightness	10,000 lumens	12,000 lumens	12,000 lumens
Light Source	Laser Diode (Laser class: Class 1)Class 3R for North America. Luminance life for set: 20,000 hours at half luminance (normal)/ 24,000 hours at half luminance (Eco) Temperature: 35°C (95°F), Altitude 700m (22ft 12in), Dust: 0.15mg/m³ 43,800 hours at constant luminance (Longlife1) 61,320 hours at constant luminance (Longlife2) 87,600 hours at constant luminance (Longlife3)	Laser Diode (Laser class: Class 1) Luminance life for set: 20,000 hours at half luminance (normal)/ 24,000 hours at half luminance (Eco) * Temperature: 35°C (95°F), Altitude 700m (22ft 12in), Dust: 0.15mg/m³ 43,800 hours at constant luminance (Longlife1) 61,320 hours at constant luminance (Longlife2) 87,600 hours at constant luminance (Longlife3)	Laser Diode (Laser class: Class 1) Luminance life for set: 20,000 hours at half luminance (normal)/ 24,000 hours at half luminance (Eco) * Temperature: 35°C (95°F), Altitude 700m (22ft 12in), Dust: 0.15mg/m³ 43,800 hours at constant luminance (Longlife1) 61,320 hours at constant luminance (Longlife2) 87,600 hours at constant luminance (Longlife3)
Resolution	5,120 x 3,200 pixels (Quad Pixel Drive: ON)	1,920 x 1,200 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,200 pixels.)	1,400 x 1,050 pixels (Input signals that exceed this resolution will be converted to 1,400 x 1,050 pixels.)
Contrast Ratio	20,000:1 (full on/full off, in Dynamic Contrast 3 mode)	20,000:1 (full on/full off, in Dynamic Contrast 3 mode)	20,000:1 (full on/full off, in Dynamic Contrast 3 mode)
Screen Size	1.78-25.4 m (70-1,000 inches) (16:10 aspect ratio) 1.78-15.24 m (70 - 600 inches) with the ET-D75LE8 (16:10 aspect ratio) 3.05-15.24 m (120 - 600 inches) with the ET-D75LE90 (16:10 aspect ratio)	1.78-25.4 m (70-1,000 inches) (16:10 aspect ratio) 1.78-15.24 m (70-600 inches) with the ET-D75LE8 (16:10 aspect ratio) 3.05-15.24 m (120-600 inches) with the ET-D75LE90 (16:10 aspect ratio)	1.78-25.4 m (70-1,000 inches) (4:3 aspect ratio) 1.78-15.24 m (70-600 inches) with the ET-D75LE8 (4:3 aspect ratio) 3.05-15.24 m (120-600 inches) with the ET-D75LE90 (4:3 aspect ratio)
Optical Axis Shift \| Vertical	±59% (±44% with the ET-D75LE6), (+74-84% with the ET-D75LE90), from center of screen, powered	±55% (±44% with the ET-D75LE6), (+73-78% with the ET-D75LE90), from center of screen, powered	±50% (±40% with the ET-D75LE6), (+71% with the ET-D75LE90), from center of screen, powered
Optical Axis Shift \| Horizontal	±29% (±19% with the ET-D75LE6), (-12-16% with the ET-D75LE90), from center of screen, powered NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.	±20% (±15% with the ET-D75LE6), (±6% with the ET-D75LE90), from center of screen, powered NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.	±30% (±20% with the ET-D75LE6) from center of screen, powered NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50/ET-D75LE90.
Lens	Optional powered zoom/focus lenses	Optional powered zoom/focus lenses	Optional powered zoom/focus lenses
Installation	Ceiling/floor, front/rear	Ceiling/floor, front/rear	Ceiling/floor, front/rear
Terminals \| SDI In 1	BNC x 1, 3G/HD/SD-SDI input, Dual-link input (LINK-A) , Quad-link input SD-SDI signal SMPTE ST 259 compliant HD-SDI signal SMPTE ST 292 compliant 3G-SDI signal SMPTE ST 424 compliant Dual-link HD-SDI signal SMPTE ST 372 compliant Dual-link 3G-SDI signal SMPTE ST 425 compliant Quad-link HD-SDI signal Quad-link 3G-SDI signal SMPTE ST 425 compliant	BNC x 2, Dual-link 3G-SDI signal: SMPTE ST 425 compliant 3G-SDI (3G/HD/SD-SDI, Dual-link HD-SDI, Dual-link 3G-SDI) signal: SMPTE ST 424 compliant Dual-link HD-SDI signal: SMPTE ST 372 compliant HD-SDI signal: SMPTE ST 292 compliant SD-SDI signal: SMPTE ST 259 compliant	BNC x 2, (3G/HD/SD-SDI, Dual-link HD-SDI, Dual-link 3G-SDI) 3G-SDI signal: SMPTE ST 424 compliant HD-SDI signal: SMPTE ST 292 compliant SD-SDI signal: SMPTE ST 259 compliant
Terminals \| HDMI In		HDMI 19-pin x 1, Deep Color, compatible with HDCP, NOTE: Compatible with non-interlaced signals only.	HDMI 19-pin x 1, Deep Color, compatible with HDCP, NOTE: Compatible with non-interlaced signals only.
Terminals \| DVI-D In		DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only	DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only
Terminals \| RGB 1 In		BNC x 5	BNC x 5
Terminals \| RGB 1 In \| R, G, B		R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.	R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals \| RGB 1 In \| Y, PB, PR (Y, CB, CR)		Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms	Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms
Terminals \| RGB 1 In \| Video in		BNC x 1, 1.0 Vp-p 75 ohms Y/C Y: 1.0 Vp-p (including sync signal), C: 0.286 Vp-p, 75 ohms	BNC x 1, 1.0 Vp-p 75 ohms Y/C Y: 1.0 Vp-p (including sync signal), C: 0.286 Vp-p, 75 ohms
Terminals \| RGB 2 In		D-sub HD 15-pin (female) x 1	D-sub HD 15-pin (female) x 1
Terminals \| RGB 2 In \| R, G, B		R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic	R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic
Terminals \| RGB 2 In \| Y, PB, PR (Y, CB, CR)		Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms	Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals \| 3D Sync 1 In/Out		BNC x 1, 1.0 Vp-p, 75 ohms Input: TTL, high impedance. Output: TTL, max. 10 mA	BNC x 1, 1.0 Vp-p, 75 ohms Input: TTL, high impedance. Output: TTL, max. 10 mA
Terminals \| 3D Sync 2 Out		BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA	BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA
Terminals \| Serial In	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals \| Serial Out	D-sub 9-pin (male) x 1 for link control	D-sub 9-pin (male) x 1 for link control	D-sub 9-pin (male) x 1 for link control
Terminals \| Remote 1 In		M3 jack x 1 for wired remote control	M3 jack x 1 for wired remote control
Terminals \| Remote 1 Out		M3 jack x 1 for link control	M3 jack x 1 for link control
Terminals \| Remote 2 In	D-sub 9-pin (female) x 1 for external control (parallel)	D-sub 9-pin x 1 for external control (parallel)	D-sub 9-pin x 1 for external control (parallel)
Terminals \| DIGITAL LINK	RJ-45 x 1 (for network, DIGITAL LINK connection (HDBaseT™ compatible), 100Base-TX,compatible with Art-Net, PJLink™ (class 1), Deep Color, HDCP2.2)	RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink™,100base-tx, Art-Net compatible	RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink™,100base-tx, Art-Net compatible
Terminals \| Expansion Slot	x 2 (SLOT 1，SLOT 2), SLOT NX (Compatible with Optional Board)
Power Supply	AC 100-240 V, 50/60 Hz (Note: Brightness may decrease depending on power conditions)	AC 100-240 V 50/60 Hz	AC 100-240 V 50/60 Hz
Power Consumption	1,270 W (0.3 W with STANDBY MODE set to ECO. 4 W with STANDBY MODE set to NORMAL.), Average power consumption NORMAL: 913W ECO: 782W LONG LIFE1: 531-732W LONG LIFE 2: 477-702W LONG LIFE 3: 423-665W *Operating Temperature: 25 °C (77 °F), Altitude: 700m (22 ft 12 in), ICE627087: 2008 Broadcast contents, Picture mode: Dynamic, Dynamic Contrast3	1,200 W (1,280 VA) (0.3 W with STANDBY MODE set to ECO. 4 W with STANDBY MODE set to NORMAL.), Average power consumption NORMAL: 800W ECO: 680W LONG LIFE1: 620W LONG LIFE 2: 590W LONG LIFE 3: 550W *Operating Temperature: 25 °C (77 °F), Altitude: 700m (22 ft 12 in), ICE627087: 2008 Broadcast contents, Picture mode: Dynamic, Dynamic Contrast3	1,200 W (1,280 VA) (0.3 W with STANDBY MODE set to ECO. 4 W with STANDBY MODE set to NORMAL.), Average power consumption NORMAL: 800W ECO: 680W LONG LIFE1: 620W LONG LIFE 2: 590W LONG LIFE 3: 550W *Operating Temperature: 25 °C (77 °F), Altitude: 700m (22 ft 12 in), ICE627087: 2008 Broadcast contents, Picture mode: Dynamic, Dynamic Contrast3
Cabinet Materials	Molded plastic	Molded plastic	Molded plastic
Operation Noise	46 dB	43 dB	43 dB
Operating Temperature	Ambient operating temperature: 0°C to 45°C (32 °F to 113 °F). Ambient operating humidity: 10% - 80% (no condensation) When the operating mode is set to "Normal", the operating temperature range is 0°C to 45°C (32 °F to 113 °F), and at altitudes from 1,400 m to 4,200 m (4,593 ft to 13,780 ft) it is 0°C to 40°C (32 °F to 104 °F). When the operating mode is set to "Eco", or "Long Life 1/2/3", the operating temperature range is 0°C to 40°C (32 °F to 104 °F). When the projector is used with a Smoke Cut Filter, the operating temperature range is 0°C to 35°C (32 °F to 95 °F). Furthermore, when the operating mode is set to "Eco", or "Long Life 1/2/3",the projector cannot be used at altitudes above 2700 m (8,858 ft). In addition, when the projector is used with a Smoke Cut Filter, it cannot be used at altitudes above 1,400 m (4,593 ft). The brightness of the light source may drop depending on the operating environment and the operating temperature range in order to protect the projector.	Normal The operating temperature range is 0°C to 50°C (32 °F to 122 °F). (Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes from 700 m to 2,700 m (2,297 ft to 8,858 ft) above sea level,and at operating temperatures of 25°C (77°F) or more at altitudes from 2,700 m to 4,200 m (8,858 ft to 13,780 ft) above sea level.) Eco/Long life 1/2/3 The operating temperature range is 0°C to 45°C (32 °F to 113 °F). (Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes up to 2,700 m (8,858 ft) above sea level. The projector cannot be used at altitudes of 2,700 m (8,858 ft) or more above sea level.) When the projector is used with a Smoke Cut Filter The operating temperature range is 0°C to 40°C (32 °F to 104 °F). (The projector cannot be used at altitudes of 1,400 m (4,593 ft) or more above sea level.) * The brightness of the light source may drop depending on the operating temperature range. The higher the temperture, the greater the drop in the brightness of the light source will be.	Normal The operating temperature range is 0°C to 50°C (32 °F to 122 °F). (Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes from 700 m to 2,700 m (2,297 ft to 8,858 ft) above sea level, and at operating temperatures of 25°C (77°F) or more at altitudes from 2,700 m to 4,200 m (8,858 ft to 13,780 ft) above sea level.) Eco/Long life 1/2/3 The operating temperature range is 0°C to 45°C (32 °F to 113 °F). (Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes up to 2,700 m (8,858 ft) above sea level. The projector cannot be used at altitudes of 2,700 m (8,858 ft) or more above sea level.) When the projector is used with a Smoke Cut Filter The operating temperature range is 0°C to 40°C (32 °F to 104 °F). (The projector cannot be used at altitudes of 1,400 m (4,593 ft) or more above sea level.) * The brightness of the light source may drop depending on the operating temperature range. The higher the temperture, the greater the drop in the brightness of the light source will be.
Dimensions	578 x 323.5 x 740 mm (22-3/4 x 12-23/32 x 29-1/8 inches) (with projections) 578 x 270 x 725 mm (22-3/4 x 10-5/8 x 28-17/32 inches) (without lens, feet or projections)	578 x 323.5 x 740 mm (22-3/4 x 12-23/32 x 29-1/8 inches) (without lens)	578 x 323.5 x 740 mm (22-3/4 x 12-23/32 x 29-1/8 inches) (without lens)
Weight	49 kg (108.0 lbs) (without lens)	44 kg (97.0 lbs) (without lens)	44 kg (97.0 lbs) (without lens)
Applicable Software/Application	Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software,Geometry Manager Pro (ET-UK20 series Upgrade Kit and ET-CUK10 series Auto Screen Adjustment Kit)	10%-80% (no condensation)	10%-80% (no condensation)

Key Features
Kablolama ve sistem yükseltmelerini basitleştirir, böylece tavana montaj ve diğer kalıcı kurulumlar için ideal hale gelir.
100 metreye kadar iletim
İki HDMI ve RGB girişi takımı da dahil bol giriş terminali.
Ayrı bir ses çıkışı, ekran gücü kapatıldığında ses çıkışını sağlar.
ET-YFB100G girişi, DIGITAL LINK uyumlu bir Panasonic ekranın uzaktan kumandası ile seçilebilir

Key Features
Kablolama ve sistem yükseltmelerini basitleştirir, böylece tavana montaj ve diğer kalıcı kurulumlar için ideal hale gelir.
100 metreye kadar iletim
İki HDMI ve RGB girişi takımı da dahil bol giriş terminali.
Ayrı bir ses çıkışı, ekran gücü kapatıldığında ses çıkışını sağlar.
ET-YFB100G girişi, DIGITAL LINK uyumlu bir Panasonic ekranın uzaktan kumandası ile seçilebilir

Key Features
30.000 lm parlaklığa kadar yüksek parlaklıklı 3 çipli DLP projektörler ile uyumludur
WQXGA (4K+) ultra yüksek çözünürlüklü görüntü projeksiyonunu destekler
Kurulum esnekliği, geniş lens kaydırma ile desteklenir (dikey: ±%37'ye kadar, yatay: ±%17'ye kadar).
Planetaryumlardaki kubbe-tiyatro uygulamaları, sergilerdeki video kubbeleri veya eğlence parkı faaliyetleri için uyarlanmıştır

Kompakt Solid Shine Lazer 12.000 lümen Projektör

PT-RS11

Temel özellikler

Daha Düşük Çalışma Maliyetleri, Daha Yüksek Güvenilirlik

360 Derece Kurulum Esnekliği

Ürün galerisi

Teknik özellikler tablosu

Ürün serileri

Aksesuarlar ve Yazılım

ET-YFB100G

ET-YFB100G

ET-D3LEF70

ET-D3LEW50

ET-D3LEU100

İlgili kaynaklar