Il proiettore a laser Solid Shine 4K+ più piccolo e leggero

PT-RQ13

Discontinued

Progettato per una luminosità stabile a lunga durata in eventi e staging Proiettore con sorgente di luce a laser DLP a 3 chip, 10.000 lumen, con risoluzione 4K+.

Scroll down

Caratteristiche principali

Laser DLP a 3 chip, 10.000 lumen, 4K+
Prestazioni a pixel 5K con sistema Quad Pixel Drive su un chipset WQXGA
Velocità di fotogrammi elevata a 240Hz per filmati straordinari e nitidi
Proiezione a laser senza lampada e sistema a liquido refrigerante resistente alla polvere, per un funzionamento di 20.000 ore senza manutenzione
Rapporto di contrasto 20.000:1
  • Quad Pixel Drive produces industry's first beyond 4K screen resolution (PT-RQ13K only).--> Quad Piexel Drive genera una risoluzione dello schermo superiore al 4k
  • Il processore Real Motion combina la creazione di fotogrammi e l'elaborazione ad alta velocità (240 Hz) per una riproduzione perfetta dei movimenti fluidi
  • 10.000 lm per una luminosità incredibile
  • Il Contrasto dinamico raggiunge un rapporto di contrasto pari a 20.000:1*1, controllando l'emissione della luce laser
  • Detail Clarity Processor di nuova generazione per produrre immagini con trame naturali nei minimi dettagli
  • System Daylight View 3 per una percezione cromatica avanzata negli ambienti intensamente illuminati e nelle applicazioni di mappatura
  • Modalità di simulazione DICOM per presentazioni e formazione medica*2
  • Modalità 709 assicura una riproduzione accurata dei colori per la proiezione HDTV

Costi di esercizio ridotti, affidabilità superiore

  • Durata estremamente prolungata della sorgente di luce, fino a 20.000 ore*3
  • L'innovativo sistema di raffredamento a liquido consente un funzionamento silenzioso
  • Funzionamento stabile in presenza di temperature ambientali fino a 45 °C*4
  • Riproduzione dei colori coerente, senza deterioramento delle immagini nel tempo
  • Il motore della sorgente di luce laser consente il funzionamento 24/7
  • Blocco ottico resistente alla polvere
  • Ampio intervallo di spostamento motorizzato dell'obiettivo

Flessibilità di installazione a 360°

  • Proiezione verticale, orizzontale e inclinata, a 360° gradi, consentita dalla sorgente di luce laser
  • Il sistema di supporto multischermo unisce perfettamente le immagini proiettate, grazie a Edge Blending, Color Matching e Digital Image Enlargement.
  • Geometric Adjustment per la proiezione su superfici curve o sferiche
  • Compatibile con il Kit di regolazione automatica dello schermo ET-CUK10*5
  • Controllo della luminosità per più unità                                                                                                           
  • Compatibile con il Multi Monitoring & Control Software e l'Early Warning Software di Panasonic
  • La connessione DIGITAL LINK a cavo singolo trasmette segnali video e di controllo a una distanza fino a 100 m
  • Compatibile con il protocollo di controllo del segnale luminoso DMX di Art-Net
  • Ampia gamma di terminali, inclusi 3G-SDI, DIGITAL LINK, DVI-D e HDMI (PT-RQ13k richiede terminali opzionali per DVI-D e HDMI)
  • Condivide obiettivi comuni (incluso l'obiettivo ultra-short throw ET-D75LE90) con la gamma di proiettori DLP™ a 3 chip di Panasonic.

*1 Attivazione/disattivazione complete, con Contrasto dinamico impostato su “3”, *2 Questo prodotto non è uno strumento medico. Non utilizzarlo per diagnosi mediche reali, *3 L'ambiente di utilizzo può influire sulla durata della sorgente di luce, *4 È possibile ridurre l'emissione luminosa per proteggere il proiettore in base alle condizioni ambientali, *5 L'ET-CUK10 è disponibile per l'utilizzo in tutto il mondo, tranne negli Stati Uniti. La disponibilità dipende dal paese

Tabella delle specifiche

Brightness10,000 lumens
Lamp3-Chip DLP Laser
Resolution5,120 x 3,200 pixels (Quad Pixel Drive: ON)
Power SupplyAC 100-240 V, 50/60 Hz (Note: Brightness may decrease depending on power conditions)
Power Consumption1,270 W (0.3 W with STANDBY MODE set to ECO. 4 W with STANDBY MODE set to NORMAL.), Average power consumption NORMAL: 913W ECO: 782W LONG LIFE1: 531-732W LONG LIFE 2: 477-702W LONG LIFE 3: 423-665W *Operating Temperature: 25 °C (77 °F), Altitude: 700m (22 ft 12 in), ICE627087: 2008 Broadcast contents, Picture mode: Dynamic, Dynamic Contrast3
DLP™ Chip | Panel Size22.9 mm (0.9 inches) diagonal (16:10 aspect ratio)
DLP™ Chip | Display MethodDLP™ chip x 3 (R, G, B), DLP™ projection system
DLP™ Chip | Pixels4,096,000 (2,560 x 1,600) x 3, total of 12,288,000 pixels 49,152,000 (12,288,000 x 4) pixels when Quad Pixel Drive set to ON

Serie di prodotti

PT-RQ13 Series

 
PT-RQ13 Series
Model
Lens test
Optional powered zoom/focus lenses
Optional powered zoom/focus lenses
Optional powered zoom/focus lenses
Projector Type
3-Chip DLP Laser
3-Chip DLP Laser
3-Chip DLP Laser
DLP™ Chip | Panel Size
22.9 mm (0.9 inches) diagonal (16:10 aspect ratio)
24.4 mm (0.96 inches) diagonal (16:10 aspect ratio)
24.1 mm (0.95 inches) diagonal (4:3 aspect ratio)
DLP™ Chip | Display Method
DLP™ chip x 3 (R, G, B), DLP™ projection system
DLP™ chip x 3 (R, G, B), DLP™ projection system
DLP™ chip x 3 (R, G, B), DLP™ projection system
DLP™ chip | Number of Pixels
4,096,000 (2,560 x 1,600) x 3, total of 12,288,000 pixels 49,152,000 (12,288,000 x 4) pixels when Quad Pixel Drive set to ON
2,304,000 (1,920 x 1,200) x 3, total of 6,912,000 pixels
1,470,000 (1,400 x 1,050) x 3, total of 4,410,000 pixels
Brightness
10,000 lumens
12,000 lumens
12,000 lumens
Light Source
Laser Diode (Laser class: Class 1)*Class 3R for North America. Luminance life for set: 20,000 hours at half luminance (normal)/ 24,000 hours at half luminance (Eco) * Temperature: 35°C (95°F), Altitude 700m (22ft 12in), Dust: 0.15mg/m³ 43,800 hours at constant luminance (Longlife1) 61,320 hours at constant luminance (Longlife2) 87,600 hours at constant luminance (Longlife3)
Laser Diode (Laser class: Class 1) Luminance life for set: 20,000 hours at half luminance (normal)/ 24,000 hours at half luminance (Eco) * Temperature: 35°C (95°F), Altitude 700m (22ft 12in), Dust: 0.15mg/m³ 43,800 hours at constant luminance (Longlife1) 61,320 hours at constant luminance (Longlife2) 87,600 hours at constant luminance (Longlife3)
Laser Diode (Laser class: Class 1) Luminance life for set: 20,000 hours at half luminance (normal)/ 24,000 hours at half luminance (Eco) * Temperature: 35°C (95°F), Altitude 700m (22ft 12in), Dust: 0.15mg/m³ 43,800 hours at constant luminance (Longlife1) 61,320 hours at constant luminance (Longlife2) 87,600 hours at constant luminance (Longlife3)
Resolution
5,120 x 3,200 pixels (Quad Pixel Drive: ON)
1,920 x 1,200 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,200 pixels.)
1,400 x 1,050 pixels (Input signals that exceed this resolution will be converted to 1,400 x 1,050 pixels.)
Contrast Ratio
20,000:1 (full on/full off, in Dynamic Contrast 3 mode)
20,000:1 (full on/full off, in Dynamic Contrast 3 mode)
20,000:1 (full on/full off, in Dynamic Contrast 3 mode)
Screen Size
1.78-25.4 m (70-1,000 inches) (16:10 aspect ratio) 1.78-15.24 m (70 - 600 inches) with the ET-D75LE8 (16:10 aspect ratio) 3.05-15.24 m (120 - 600 inches) with the ET-D75LE90 (16:10 aspect ratio)
1.78-25.4 m (70-1,000 inches) (16:10 aspect ratio) 1.78-15.24 m (70-600 inches) with the ET-D75LE8 (16:10 aspect ratio) 3.05-15.24 m (120-600 inches) with the ET-D75LE90 (16:10 aspect ratio)
1.78-25.4 m (70-1,000 inches) (4:3 aspect ratio) 1.78-15.24 m (70-600 inches) with the ET-D75LE8 (4:3 aspect ratio) 3.05-15.24 m (120-600 inches) with the ET-D75LE90 (4:3 aspect ratio)
Optical Axis Shift | Vertical
±59% (±44% with the ET-D75LE6), (+74-84% with the ET-D75LE90), from center of screen, powered
±55% (±44% with the ET-D75LE6), (+73-78% with the ET-D75LE90), from center of screen, powered
±50% (±40% with the ET-D75LE6), (+71% with the ET-D75LE90), from center of screen, powered
Optical Axis Shift | Horizontal
±29% (±19% with the ET-D75LE6), (-12-16% with the ET-D75LE90), from center of screen, powered NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.
±20% (±15% with the ET-D75LE6), (±6% with the ET-D75LE90), from center of screen, powered NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.
±30% (±20% with the ET-D75LE6) from center of screen, powered NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50/ET-D75LE90.
Lens
Optional powered zoom/focus lenses
Optional powered zoom/focus lenses
Optional powered zoom/focus lenses
Installation
Ceiling/floor, front/rear
Ceiling/floor, front/rear
Ceiling/floor, front/rear
Terminals | SDI In 1
BNC x 1, 3G/HD/SD-SDI input, Dual-link input (LINK-A) , Quad-link input SD-SDI signal SMPTE ST 259 compliant HD-SDI signal SMPTE ST 292 compliant 3G-SDI signal SMPTE ST 424 compliant Dual-link HD-SDI signal SMPTE ST 372 compliant Dual-link 3G-SDI signal SMPTE ST 425 compliant Quad-link HD-SDI signal Quad-link 3G-SDI signal SMPTE ST 425 compliant
BNC x 2, Dual-link 3G-SDI signal: SMPTE ST 425 compliant 3G-SDI (3G/HD/SD-SDI, Dual-link HD-SDI, Dual-link 3G-SDI) signal: SMPTE ST 424 compliant Dual-link HD-SDI signal: SMPTE ST 372 compliant HD-SDI signal: SMPTE ST 292 compliant SD-SDI signal: SMPTE ST 259 compliant
BNC x 2, (3G/HD/SD-SDI, Dual-link HD-SDI, Dual-link 3G-SDI) 3G-SDI signal: SMPTE ST 424 compliant HD-SDI signal: SMPTE ST 292 compliant SD-SDI signal: SMPTE ST 259 compliant
Terminals | HDMI In
HDMI 19-pin x 1, Deep Color, compatible with HDCP, NOTE: Compatible with non-interlaced signals only.
HDMI 19-pin x 1, Deep Color, compatible with HDCP, NOTE: Compatible with non-interlaced signals only.
Terminals | DVI-D In
DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only
DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only
Terminals | RGB 1 In
BNC x 5
BNC x 5
Terminals | RGB 1 In | R, G, B
R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals | RGB 1 In | Y, PB, PR (Y, CB, CR)
Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms
Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms
Terminals | RGB 1 In | Video in
BNC x 1, 1.0 Vp-p 75 ohms Y/C Y: 1.0 Vp-p (including sync signal), C: 0.286 Vp-p, 75 ohms
BNC x 1, 1.0 Vp-p 75 ohms Y/C Y: 1.0 Vp-p (including sync signal), C: 0.286 Vp-p, 75 ohms
Terminals | RGB 2 In
D-sub HD 15-pin (female) x 1
D-sub HD 15-pin (female) x 1
Terminals | RGB 2 In | R, G, B
R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic
R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic
Terminals | RGB 2 In | Y, PB, PR (Y, CB, CR)
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals | 3D Sync 1 In/Out
BNC x 1, 1.0 Vp-p, 75 ohms Input: TTL, high impedance. Output: TTL, max. 10 mA
BNC x 1, 1.0 Vp-p, 75 ohms Input: TTL, high impedance. Output: TTL, max. 10 mA
Terminals | 3D Sync 2 Out
BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA
BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA
Terminals | Serial In
D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals | Serial Out
D-sub 9-pin (male) x 1 for link control
D-sub 9-pin (male) x 1 for link control
D-sub 9-pin (male) x 1 for link control
Terminals | Remote 1 In
M3 jack x 1 for wired remote control
M3 jack x 1 for wired remote control
Terminals | Remote 1 Out
M3 jack x 1 for link control
M3 jack x 1 for link control
Terminals | Remote 2 In
D-sub 9-pin (female) x 1 for external control (parallel)
D-sub 9-pin x 1 for external control (parallel)
D-sub 9-pin x 1 for external control (parallel)
Terminals | DIGITAL LINK
RJ-45 x 1 (for network, DIGITAL LINK connection (HDBaseT™ compatible), 100Base-TX,compatible with Art-Net, PJLink™ (class 1), Deep Color, HDCP2.2)
RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink™,100base-tx, Art-Net compatible
RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink™,100base-tx, Art-Net compatible
Terminals | Expansion Slot
x 2 (SLOT 1,SLOT 2), SLOT NX (Compatible with Optional Board)
Power Supply
AC 100-240 V, 50/60 Hz (Note: Brightness may decrease depending on power conditions)
AC 100-240 V 50/60 Hz
AC 100-240 V 50/60 Hz
Power Consumption
1,270 W (0.3 W with STANDBY MODE set to ECO. 4 W with STANDBY MODE set to NORMAL.), Average power consumption NORMAL: 913W ECO: 782W LONG LIFE1: 531-732W LONG LIFE 2: 477-702W LONG LIFE 3: 423-665W *Operating Temperature: 25 °C (77 °F), Altitude: 700m (22 ft 12 in), ICE627087: 2008 Broadcast contents, Picture mode: Dynamic, Dynamic Contrast3
1,200 W (1,280 VA) (0.3 W with STANDBY MODE set to ECO. 4 W with STANDBY MODE set to NORMAL.), Average power consumption NORMAL: 800W ECO: 680W LONG LIFE1: 620W LONG LIFE 2: 590W LONG LIFE 3: 550W *Operating Temperature: 25 °C (77 °F), Altitude: 700m (22 ft 12 in), ICE627087: 2008 Broadcast contents, Picture mode: Dynamic, Dynamic Contrast3
1,200 W (1,280 VA) (0.3 W with STANDBY MODE set to ECO. 4 W with STANDBY MODE set to NORMAL.), Average power consumption NORMAL: 800W ECO: 680W LONG LIFE1: 620W LONG LIFE 2: 590W LONG LIFE 3: 550W *Operating Temperature: 25 °C (77 °F), Altitude: 700m (22 ft 12 in), ICE627087: 2008 Broadcast contents, Picture mode: Dynamic, Dynamic Contrast3
Cabinet Materials
Molded plastic
Molded plastic
Molded plastic
Operation Noise
46 dB
43 dB
43 dB
Operating Temperature
Ambient operating temperature: 0°C to 45°C (32 °F to 113 °F). Ambient operating humidity: 10% - 80% (no condensation) When the operating mode is set to "Normal", the operating temperature range is 0°C to 45°C (32 °F to 113 °F), and at altitudes from 1,400 m to 4,200 m (4,593 ft to 13,780 ft) it is 0°C to 40°C (32 °F to 104 °F). When the operating mode is set to "Eco", or "Long Life 1/2/3", the operating temperature range is 0°C to 40°C (32 °F to 104 °F). When the projector is used with a Smoke Cut Filter, the operating temperature range is 0°C to 35°C (32 °F to 95 °F). Furthermore, when the operating mode is set to "Eco", or "Long Life 1/2/3",the projector cannot be used at altitudes above 2700 m (8,858 ft). In addition, when the projector is used with a Smoke Cut Filter, it cannot be used at altitudes above 1,400 m (4,593 ft). The brightness of the light source may drop depending on the operating environment and the operating temperature range in order to protect the projector.
Normal The operating temperature range is 0°C to 50°C (32 °F to 122 °F). (Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes from 700 m to 2,700 m (2,297 ft to 8,858 ft) above sea level,and at operating temperatures of 25°C (77°F) or more at altitudes from 2,700 m to 4,200 m (8,858 ft to 13,780 ft) above sea level.) Eco/Long life 1/2/3 The operating temperature range is 0°C to 45°C (32 °F to 113 °F). (Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes up to 2,700 m (8,858 ft) above sea level. The projector cannot be used at altitudes of 2,700 m (8,858 ft) or more above sea level.) When the projector is used with a Smoke Cut Filter The operating temperature range is 0°C to 40°C (32 °F to 104 °F). (The projector cannot be used at altitudes of 1,400 m (4,593 ft) or more above sea level.) * The brightness of the light source may drop depending on the operating temperature range. The higher the temperture, the greater the drop in the brightness of the light source will be.
Normal The operating temperature range is 0°C to 50°C (32 °F to 122 °F). (Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes from 700 m to 2,700 m (2,297 ft to 8,858 ft) above sea level,and at operating temperatures of 25°C (77°F) or more at altitudes from 2,700 m to 4,200 m (8,858 ft to 13,780 ft) above sea level.) Eco/Long life 1/2/3 The operating temperature range is 0°C to 45°C (32 °F to 113 °F). (Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes up to 2,700 m (8,858 ft) above sea level. The projector cannot be used at altitudes of 2,700 m (8,858 ft) or more above sea level.) When the projector is used with a Smoke Cut Filter The operating temperature range is 0°C to 40°C (32 °F to 104 °F). (The projector cannot be used at altitudes of 1,400 m (4,593 ft) or more above sea level.) * The brightness of the light source may drop depending on the operating temperature range. The higher the temperture, the greater the drop in the brightness of the light source will be.
Dimensions
578 x 323.5 x 740 mm (22-3/4 x 12-23/32 x 29-1/8 inches) (with projections) 578 x 270 x 725 mm (22-3/4 x 10-5/8 x 28-17/32 inches) (without lens, feet or projections)
578 x 323.5 x 740 mm (22-3/4 x 12-23/32 x 29-1/8 inches) (without lens)
578 x 323.5 x 740 mm (22-3/4 x 12-23/32 x 29-1/8 inches) (without lens)
Weight
49 kg (108.0 lbs) (without lens)
44 kg (97.0 lbs) (without lens)
44 kg (97.0 lbs) (without lens)
Applicable Software/Application
Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software,Geometry Manager Pro (ET-UK20 series Upgrade Kit and ET-CUK10 series Auto Screen Adjustment Kit)
Logo Transfer Software, Multi Monitoring & Control Software,Early Warning Software,Geometry Manager Pro (ET-UK20 series Upgrade Kit and ET-CUK10 series Auto Screen Adjustment Kit)
Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software,Geometry Manager Pro (ET-UK20 series Upgrade Kit and ET-CUK10 series Auto Screen Adjustment Kit)

Accessori & Software

Digital Interface Box

ET-YFB100G

Combinando l'ET-YFB100G con un dispositivo predisposto per DIGITAL LINK è possibile trasmettere segnali video, audio e di controllo tramite un cavo singolo.

Showing 1 of 1

Digital Interface Box

ET-YFB100G

Combinando l'ET-YFB100G con un dispositivo predisposto per DIGITAL LINK è possibile trasmettere segnali video, audio e di controllo tramite un cavo singolo.

Showing 1 of 1

Lenses for 3-Chip DLP < 35.000 lumens

ET-D75MC1

Coperchio del motore obiettivo per proiettori 3-DLP

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LEF70

L’ampio angolo di visione (91,5°) garantisce la massima copertura dello schermo con un singolo proiettore. 

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LEW50

Obiettivo a fuoco fisso per proiettore DLP a 3 chip, Rapporto di proiezione 0,7:1 (WUXGA)

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LEU100

Project in tight spaces from very short throw-distances. With zero offset capability, these two lens options widen the versatility of Panasonic’s 3-Chip DLP™ lineup.

Showing 4 of 4

Filters

ET-EMF330

Filtro Eco

Filters

ET-SFR330

 Cut Filter per fumo

Showing 2 of 2

Interface board/conversion cable

ET-MDNDV10

Scheda per segnale di ingresso DVI-D

Interface board/conversion cable

TY-TBN03G

Scheda per segnale di ingresso 3G-SDI

Interface board/conversion cable

ET-MDN12G10

Scheda di segnale 12G-SDI

Showing 3 of 3

Software

Multi Monitoring and Control Software

Controllo remoto, monitoraggio e reporting di stato live sulla flotta di proiettori e display via intranet.

Showing 1 of 1

Brackets

ET-PKD520S

Staffa di montaggio per soffitti bassi

Showing 1 of 1

Frames

ET-RFD60

The rental frames are sturdy, strong and visually appealing. In addition, they offer a horizontal and vertical adjustment feature for the ideal projector position. 

Showing 1 of 1

Risorse correlate

Showing 4 of 37

Showing 4 of 16

Showing 4 of 12

Showing 4 of 5

Showing 4 of 7